So we're pretty much window experts now! With 2 window removals and installs under our belts we're fellin' pretty good! We happened to have an excellent friend in town. Sir Gabe! We acquired his and our current rommate/friend don's help with the removal/install of our final window.
Who could say no to help from those 2!?!?!
She's a doozy! That window in the back is actualy 6 feet wide and 4 feet tall.
We thought it might be a bit much for just 2 people. Especially since it's about 8 feet up on the outside. And great company is great!
So just like usual, cutting away the old window.
And there's our strong sexy helpers making sure nothing comes crashing down!
Vanessa and I worked on the sill.
While Gabe and Don worked on framing the rough opening.
Once they framed the rough opening, we applied sheathing and attached the sill. Smiles for EVERYONE!
Then it was install time. Put the new guy in his hole and sealed him on up!
A couple roofing nails later, and we're good to GO!
Awww... Good times! Thanks VERY MUCH to Gabe and Don for their help with this guy. Couldn't have done it without you!
The end product!
Stay tuned for a trip to the marshmallow kingdom! Coming up next!!!
Moving right along here... On to the second bedroom window. This one went a little bit smoother with one window under our belts.
Here's what we're working with... A wide and short non-opening single pane window:
First we had to move our support wall into place. This held the roof up while we removed a large section of wall.
Once we had our support wall shimmed and screwed in place the cutting begins! We used our trusty sawzall to cut around the perimeter of the window. I did not do nearly as nice of a job on this side. The cut marks were all wavy and crooked.
Woah! What happened here!
With a wave of my magic hand, a little touch-up, and we're back in business!
It was getting late so we decided to call it a day. We didn't want to leave a giant hole into the house wide open, so we fastened a quick little wall. Worked like a charm!
We got the new wall and window framing all shimmed into place and nice and level.
This wall is right at ground level, so we didn't have to deal with being all up on ladders. Made things a bit easier to handle.
Here's Vanessa the lil' teapot, hammering away! Lookin' sassy! She's a hammering machine!
And concentrating hard on "NOT" hitting the window frame while nailing it in place. Great job! No damage done!
Look at that beauty!
Here she is from the outside. All flashed up. Still need to add siding, but again, we're concentrating on the interior for the moment. It's nice to have some opening windows in there!
Stay tuned for even MORE window madness coming soon!
So first I would just like to apoligize to those of you who subscribed to this blog. I set up the subscriptions incorrectly so you received notifications any time someone left a comment. Including SPAM comments. I have changed it so you now ONLY get notifications when we post actual blog entries. And on top of that I have taken some steps to eradicate SPAM comments. Smooth sailing from here on out!
So with that aside I'd also like to clarify that we do actually really like windows! The window we removed was taken out because it we're going to have a closet there and didn't need a window. So next on the list was replacing the current single pane windows with new double pane low-e windows for better insulation. Not to mention the old windows don't open!
So first we had to build a support wall because the windows are over 4 feet long along a load-bearing wall.
This is the window in question.
We built our support wall and installed it about 3.5 feet out from the window.
It just looks crooked. It's actually perfectly level!
So our trusty Sawzall came in handy yet again for cutting out the windows. Looking back, I can't even imagine trying to get these windows out without it.
Alright! Window removed!
So we got the framing for the new window shimmed in place and attached sheathing to the exterior.
More Sheathing
Applied adhesive flashing to the rough opening. This will prevent water from getting in between the sheathing and the framing.
Once all the flashing was in place along the lower edge we installed the sill and the window. Nailed that puppy into place once we plumbed it level and then applied flashing along the perimeter.
And that's it! For now anyways. We have some siding to install, but we're still taking care of interior problems before we work on exterior cosmetics. Soon though...
